Products

DESCRIPTION

Basic Info.

Model NO.	IAdc 537, 637, 617, 127, 437
Transfer	Air/Sea/Express
Product Name	Tricone Bit
Inserts Design	Spherical; Ballistic; Parabolic
Advantage	High Performance
Material	Tungsten Carbide, High Manganese Steel
Pressure	High Pressure
Processing Type	Forging
Bearing Type	Sealed and Non-Sealed Bearing
Diameter	3 3/4"~26"
Transport Package	Wooden Box or as Customers Inquire
Specification	TCI or Steel Tooth
Trademark	PANDA
Origin	Shandong China
HS Code	82071990
Production Capacity	2000 Pieces / Week

Product Description

Product Description:
Panda tricone bit used for geoloical prospecting,development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.now there are eleven common types of tricone rock bits.Steel teeth series:IADC CODE:116,117,126,127,136,137,216,217,317,337,TCI series:IADC CODE:417,437,447,517,527,537,547,617,627,637,647,737,837.TCI tricone bit, tci roller Bits ,roller bit,steel tooth roller bit,TCI roller bit,TCI tricone bit1.Sizes rang from 3 7/8" to 26"2.Covers almost all IADC code. 3.Reliable quality and reasonable price
Normal IADC:437Soft Formation TCI Tricone Bits:The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.517Medium Formation TCI Tricone Bits:The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formation. The HSN rubber O-ring provides adequate sealing for bearing durability.637Hard Formation TCI Tricone Bits:The 637 bits can be used to drill hard and abrasive formation. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.617Medium-Hard Formation TCI Tricone Bits:The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Specification:

		WOB	RPM	Application
		(KN/mm)	(r/min)
IADC		0.3-0.75	200-80	very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
	111/114/115
116/117		0.35-0.8	150-80	very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
121		0.3-0.85	200-80	soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
124/125			180-60
131		0.3-0.95	180-80	soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
136/137		0.35-1.0	120-60
211/241		0.3-0.95	180-80	medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds.
216/217		0.4-1.0	100-60
246/247		0.4-1.0	80-50	medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
321		0.4-1.0	150-70	medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble
324		0.4-1.0	120-50
437/447/435		0.35-0.9	240-70	very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone
517/527/515		0.35-1.0	220-60	soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
537/547/535		0.45-1.0	220-50	soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
617/615		0.45-1.1	200-50	medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
637/635		0.5-1.1	180-40	hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble
Note: Above limits of WOB and RRPM should not be used simultaneously

Diameter:

Size		Steel tooth bit	TCI bit
in	mm	Weight(kgs)	Weight(kgs)
3 7/8	98.4	5	6
4 5/8	117.5	6	6.5
5 7/8	149.2	17	18
6	152.4	18	19.5
6 1/2	165.1	19	22
7 7/8	200	29	29.5
8 1/2	215.9	35	38
8 3/4	222.2	36	40
9 1/2	241.3	57	59
9 7/8	250.8	58	60
10 5/8	269.9	66	74
12 1/4	311.1	85	111
13 5/8	346.1	118	120
14 3/4	374.6	140	160
17 1/2	444.5	230	255
20	508	428	443
22	558.8	520	560
26	660.4	720	810

Different Type:

Different Button Shapes:

FAQ:

Q1: Can I have a sample for testing?
A:Samples are still to be paid but discounted price can be provided. Q2: Do you have the inspection procedures?
A:100% strict inspection and testing for every order before packing.Q3: How can i get the after sale services?
A:Free replacement will provide once the problems casued by our product quality.Q4: Can I have a visit to your factory before the order?

A: Sure, welcome, here is our address: Yantai, Shandong.

CONTACT: